Potter19

These stainless chainplates are used for both the Potter 15 and the Potter 19.

Potter 15 and Potter 19 halyard kits made from premium low-stretch Marlow Leisure polyester double braid. Conveniently sent in two colors for easy identification of main or jib and cut to factory-specified lengths (includes enough line to run aft to...

Investment Cast Stainless Steel. This is also the factory West Wight Potter halyard shackle. Part Number A B C D SD-143520 2-1/4" 3/8" 9/19" 3/8"

windows for both Potter 15 and 19

We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful, smooth-finished teak handrails would work on any small...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...

These stainless electropolished Anchor Hangers attach securely to any 7/8 to 1” rail or pulpit and will hold most Danforth and Fortress-style anchors up to 35 pounds, flukes down to prevent snagged lines. Allows for quick release. Easy to install...

The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps

These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation. Made from Dip Molded PVC Dia. Height Mtg. Hole Int. Color 3" 5" 3-3/4" Red

These are the factory West Wight Potter 19 tangs - Long tangs (6") and short tangs (3")