null

SilverTip GelMagic

Write a Review
SKU:
S3-GM
  • SilverTip GelMagic
  • SilverTip GelMagic
$44.95 - $279.95

Description

A premixed thixotropic glue - Tubes available HERE

GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies.

GelMagic exhibits exceptionally high peel strength and employs a state of the art, two-phase epoxy morphology, which creates an adhesive bond that is tougher, more resistant to embrittlement and has better elevated temperature properties than other room temperature cured epoxy adhesives. GelMagic can be post-cured up to 140ºF for even greater performance.

 

SDS Part A | SDS Part B

Technical Data Sheet

  • For use above and below the waterline.
  • Bonds are permanent, non-brittle, highly impact and creep resistant.
  • Features a convenient 2:1 mixing ratio.
  • Will not shrink upon curing; fills large gaps without loss of strength.
  • Unique color indicator (blue) disappears when resin and hardener are thoroughly mixed.
  • Can be dispensed through most simple lever action, gear or displacement metering systems.
  • Available in cartridges that dispense with a conventional caulking gun.
Mix Ratio by Volume 100:50
Mix Ratio by Weight 100:46
Total Solids 100%
Mixed Viscosity 4,000 cps
Mixed Color Amber
Coverage @ 250 microns (10 mils) See Appendix A
Maximum Service Temperature 170°F (75°C)
Minimum Application Temperature 50°F (10°C)
Lap-Shear Strength, psi.: Polyester Laminate: 2,800
  Concrete: 1,100
  Wood (Maple): 1,800
  Aluminum: 2,200
  Galvanized Steel: 1,900
  Copper: 1,700
Gel Time @ 77°F (25°C) 30 Minutes (100g mixture)
Tack Free Time @ 77°F (25°C) 3 Hours
View AllClose

0 Reviews

View AllClose