null

Flint Plans PDF

Write a Review
LOA:
14' 9-3/4" / 4.518m
SKU:
ROSS-FLINT-ID
Availability:
Available for download after checkout
$54.00

Description

14ft 9-3/4in x 4ft 3-1/4in x 6in

Flint was designed to meet the requirements of an experienced boatman who lived on an island several miles from the mainland. The boat had to row in a spirited fashion, and be able to cover long distances under the urge of a small outboard motor. Most importantly of all, she had to be able to cut through a steep chop without pounding. The resulting boat has proved to be very successful, and displays the following characteristics:


Flint plans now inclued two sailplan options:
the gaff sloop shown above and a balanced lug

  • Stitch-and-Glue construction from pre-computed panel shapes. No strongback, mold, or full-size lofting necessary;
  • Large volume built-in emergency buoyancy;
  • Two rowing stations to allow for proper trim with differing load distribution;
  • Light weight - stripped weight of 50kg/110lbs on recently built hull using Occume Marine Plywood;
  • External gunwales reduce labour during construction, allow debris to be washed out when boat is tipped up on her side, and acts as an effective spray deflector;
  • High performance from very small outboards - has recorded 6.1 knots using a 2HP Yamaha pushing a load of four people;
  • Cruises easily at four knots with a single oarsperson;
  • The very sharp entry and pronounced "V" sections prevent pounding and help with steady tracking in a cross-wind;
  • Can be re-entered easily after a capsize (has been deliberately capsized for testing) and can be rowed safely with all the water she can hold after being righted. This characteristic is a major safety factor;
  • Can be cartopped.
  • Two sail plan options included in plans

Flint plans package contains 10 sheets of A3-sized drawings, 2 sheets of A4 drawings, and a nine-page illustrated instruction manual. Metric and Imperial versions of the plans available.

Flint plans include all details for the simple, effective sail rig shown below

Ross Lillistone's Flint plans contains 15 sheets of A3 drawings plus a 15 page illustrated instruction manual. Metric and Imperial versions of the plans available.

For Flint Study Plans, click HERE

View AllClose

Additional Information

Measurements:
Metric & Imperial
Designer Name:
Ross Lillistone
Sail area (Imperial / Metric):
64.5 sq.ft / 6 sq. m
Rig Type:
Gaff, Sloop, Lug
Ballast Weight:
Human
Keel Type:
Daggerboard
Rudder:
Kick-up
Length (range):
8' - 15'11"' / 2.44m - 4.85m
LOA:
14' 9-3/4" / 4.518m
Length at Waterline:
14' 0-3/8" / 4.278m
Beam:
4' 0-5/16" / 1.223m
Hull Weight:
85 - 199 lbs / 38.56 - 90.27kg
Estimated Hull Weight:
105lbs / 48kg including rig
Draft:
6" - 11" / 15.24 - 30.27cm
Unloaded Draft:
6" / 152mm
Weight Capacity:
316lbs / 144kg
Primary Material:
Marine Plywood
Method of Construction:
Stitch and Glue
Hull:
Monohull
Hull Type:
Displacement
Hull Shape:
V bottom
Power Source:
Electric, Human, Internal Combustion, Wind
Motor:
Outboard
Horsepower Rating:
2.5hp
Built-in Floatation:
Yes
Trailerable:
Yes
Cartop:
Yes
Unit of Measure:
Both
Instruction Manual:
Step-by-Step Instructions
Lofting Required:
No
Recommended Experience Level:
Beginner
Designer's Thoughts on Experience Level:
Simple stitch-and-glue - sophisticated shape. Follow instructions fully
View AllClose

0 Reviews

View AllClose