Description
Stainless Steel
View AllClose
The kit you need will be determined by the thickness of the material that you are mounting to. For any material that is 3/8" (9mm) thick then we recommend 1" machine screws with nuts and washers. If the material is 1/4" (6mm) or less, we recommend the 3/4" machine screw kit.
Additional Information
Note: |
Both kits have 8-32 thread SS machine screws and Nylok nuts. |
Related Products
Deckplate Wood Screw Fastener Kits
$1.00
Stainless Steel
The kit you need will be determined by the material and the thickness of the material that you are mounting to. For wood - if the wood is at least 1/2" thick, wood screws are fine...
RAKA UV Kits
$150.00 - $599.00
UV Resistant formula
RAKA is a good, economical boat building epoxy. It resists blushing and cures clear. Use it for laminating as it or with additives to make gluing, fairing and filleting mixes...
DPI Screw-Down Deckplates - Polar White
$9.99 - $15.99
Made from highly durable, UV-stabilized Polypropylene
These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look.
226 Piece Stainless Tapping & Machine Screw Kit
$43.99
Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.
Armstrong Hatches
$45.00 - $125.00
Watertight compression deck plates.
Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight...